2024 Update: Added Kabuki Deep Dish Plates, Kabuki Calibrated Plates, Diamond Pro Bumper Plates, PRx Cast Iron Change Plates
These plates all meet the FTC requirements for the “made in USA” term, where all significant parts are of US origin and all significant processing to make it is done in the US.
Credit to reader John Del Duca for outlining most of this list!
Unique steel plates with a polycarbonate plastic outer layer.
Made In
USA
Weight Tolerance
+0.5% / -0.5%
Center Hole
50.8mm
Coating
Polycarbonate
Weights
10, 25, 35, 45 lb
45lb Diameter
?
45lb Thickness
?
45lb Price
$450
Crumb Bumper Plates
Crumb bumpers are made out of rubber “crumbs” made from processing old tires. When a material is recycled and processed in the USA, the new product is considered made in the USA, regardless of the original product’s country of origin.
Crumb bumpers are significantly less dense than virgin rubber bumpers, making them much bouncier.
Hi-Temp manufactures these crumb bumpers for several companies, sometimes “white labeled” with the company’s name on the upper part as shown above for Rogue’s, but always with “Hi Temp Inc, Tuscumbia AL” on them. They vary the size, so check and be sure what you’re getting.
If you liked this article, we also have a showcase of USA-made dumbbells.
David Kiesling
David founded Adamant Barbell in 2007 and Two Rep Cave in 2018. Depending on his mood, he's into weight training, running, bodyweight exercises, and hitting the heavy bag.
View Comments
There are also plates made by:
Rogue - Standard Olympic Cast Iron
Reddstrong Equipment - Cast Iron
MUTT USA - Wheel Cast Iron
Wright Equipment - Crumb Bumper Elite
Wright Equipment - Hybrid Urethane
Wright Equipment - AMP Bumpers
The Strength Co. - Standard Olympic Cast Iron
Added the Wright plates, thanks!
Ivanko - Urethane E-Z Lift (OUEZ)
Granite Fitness - Olympic thin steel
Biggins Iron - Cast Iron 2.0
Rogue - Deep Dish Arnold Classic Cast Iron
Rogue - Wagon Wheel Steel
Kabuki updated their plates, now branded under Mayhem with bumpers and deep dish
Hello David,
Regarding the Iron Grip plates, you had some question marks about measurements and weight tolerance. I just purchased some used Urethane Iron Grip plates. I weighed them and got anywhere from 44.8 to 45.4lbs (45lb plates/15 of them). The majority were 44.6. These are older model Iron Grip plates. For the measurements, my 45lb plates are: 17 1/8" Diameter, 1 5/8" Thick with a 2 1/16" Center Hole. They are very nice plates.
That's very helpful, thanks! I'm going to add that info to this page. I used Iron Grip plates years ago at a 24 Hour Fitness regularly.
Rouge has made another type of plate, instead of deep dish they have done standard oly size cast iron.
The Strength Co makes USA-Made cast iron as well
Looks good, I gotta add them!
Hey David, This is Joe From USA Iron. Thanks for including us. If you're doing any kettlebells reviews soon, let me know and I'll get one out to you!
Hi Joe, I sent you an email a couple days ago to try to get more info on your plates and didn't hear back?
Found these guys with a distinctly "Married With Children" vibe to their name. Claim to be USA made out of Hamilton IL.
Edit: I see you already have them under USA-Iron. Nevermind.
Right, I believe USA-Iron is the one who has them made and sells to Biggins.
I thought all crumb bumpers were made at the same location in Alabama, but sold under different labels. American Barbell does most off shore, but they own the plants. Think their Hitech plates are made in USA
It sounds like Hi-Temp white labels for a few companies? Some specs appear to be different but it's possible to make special batches for them to spec. I didn't even notice that Body Solid's bumpers also say Hi-Temp on them the same as Rogue's do. Maybe I'll do one Hi-Temp listing with several links, if there's some way to verify which ones are Hi-Temps.
Right, American Barbell's Hitechplates are their only USA made plates. Good for them if they own the factory in China, but any of those are still made in China.
Hi Temp Plates always has Hi Temp Tuscumbia AL on the bottom of the plate.
Thanks for the info! I'll get that updated.
Great addition! I made a list like this myself awhile back. It'll be beneficial to those wanting to support USA made companies.
I hope so! Did I miss any? Also I forgot I need to add credit to John Del Duca for outlining most of this list.
what about York plates?
York plates have not been made in the US for a long time.
Where are York plates made? I seem to remember it was Canada now that you mention it.
I think Canada is just their bars, and the plates are from China.
Nope! You actually added one I didn't have which was the BodySold bumpers. Next, is USA-made dumbbells? I have the list for most of them alreday.
Yeah I was thinking of doing dumbbells. If you can send me what you have so far it will help me get a jump start.
View Comments
There are also plates made by:
Rogue - Standard Olympic Cast Iron
Reddstrong Equipment - Cast Iron
MUTT USA - Wheel Cast Iron
Wright Equipment - Crumb Bumper Elite
Wright Equipment - Hybrid Urethane
Wright Equipment - AMP Bumpers
The Strength Co. - Standard Olympic Cast Iron
Added the Wright plates, thanks!
Ivanko - Urethane E-Z Lift (OUEZ)
Granite Fitness - Olympic thin steel
Biggins Iron - Cast Iron 2.0
Rogue - Deep Dish Arnold Classic Cast Iron
Rogue - Wagon Wheel Steel
Bridge Built - Olympic steel plates
HomeGrown Lifting - Crumb bumpers
Strength Co - Crumb Bumpers
Kabuki updated their plates, now branded under Mayhem with bumpers and deep dish
Hello David,
Regarding the Iron Grip plates, you had some question marks about measurements and weight tolerance. I just purchased some used Urethane Iron Grip plates. I weighed them and got anywhere from 44.8 to 45.4lbs (45lb plates/15 of them). The majority were 44.6. These are older model Iron Grip plates. For the measurements, my 45lb plates are: 17 1/8" Diameter, 1 5/8" Thick with a 2 1/16" Center Hole. They are very nice plates.
That's very helpful, thanks! I'm going to add that info to this page. I used Iron Grip plates years ago at a 24 Hour Fitness regularly.
Rouge has made another type of plate, instead of deep dish they have done standard oly size cast iron.
The Strength Co makes USA-Made cast iron as well
Looks good, I gotta add them!
Hey David, This is Joe From USA Iron. Thanks for including us. If you're doing any kettlebells reviews soon, let me know and I'll get one out to you!
Hi Joe, I sent you an email a couple days ago to try to get more info on your plates and didn't hear back?
Found these guys with a distinctly "Married With Children" vibe to their name. Claim to be USA made out of Hamilton IL.
https://www.bigginsiron.com/
Edit: I see you already have them under USA-Iron. Nevermind.
Right, I believe USA-Iron is the one who has them made and sells to Biggins.
I thought all crumb bumpers were made at the same location in Alabama, but sold under different labels. American Barbell does most off shore, but they own the plants. Think their Hitech plates are made in USA
It sounds like Hi-Temp white labels for a few companies? Some specs appear to be different but it's possible to make special batches for them to spec. I didn't even notice that Body Solid's bumpers also say Hi-Temp on them the same as Rogue's do. Maybe I'll do one Hi-Temp listing with several links, if there's some way to verify which ones are Hi-Temps.
Right, American Barbell's Hitechplates are their only USA made plates. Good for them if they own the factory in China, but any of those are still made in China.
Hi Temp Plates always has Hi Temp Tuscumbia AL on the bottom of the plate.
Thanks for the info! I'll get that updated.
Great addition! I made a list like this myself awhile back. It'll be beneficial to those wanting to support USA made companies.
I hope so! Did I miss any? Also I forgot I need to add credit to John Del Duca for outlining most of this list.
what about York plates?
York plates have not been made in the US for a long time.
Where are York plates made? I seem to remember it was Canada now that you mention it.
I think Canada is just their bars, and the plates are from China.
Nope! You actually added one I didn't have which was the BodySold bumpers. Next, is USA-made dumbbells? I have the list for most of them alreday.
Yeah I was thinking of doing dumbbells. If you can send me what you have so far it will help me get a jump start.
Let me know where to send it.